Skylark V6-173 2.8L VIN X 2-bbl (1984)
on the base, squeeze the handle of the tool until its preset stop.
3.
Cut off the remaining adjusting tab. (Figure 5)
Important:
The 1-2 band stop height can be checked during an overhaul. With the transaxle disassembled, the 1-2 band stop must protrude 14 mm (9/16") through
the case. (Figure 6)
SERVICE TOOL INFORMATION
The 1-2 band stop installation tool J 38229 will be available later in the 1989 calendar year from Kent-Moore. Order the tool from Kent-Moore's Order
Department at (313) 574-2332 or 1-800-345-2233.
SERVICE PARTS INFORMATION
Service Package
Contents
Application
8649302
Stop, 1-2 Band Assembly
1984-1990 Model Years
Parts are currently available from GMSPO.
SERVICE MANUAL REFERENCE
Refer to the appropriate model year THM 440-T4/HYDRA-MATIC 4T60 (ME9) On-Car Service and/or Automatic Transaxle Unit Repair Table of
Contents for case assembly that will contain the 1-2 band stop service information.
LABOR TIME INFORMATION
