Skylark V6-173 2.8L VIN X 2-bbl (1984)
Case: Technical Service Bulletins
A/T - New Transaxle Case
Bulletin 84-7125-1
Date
Nov. '83
Ref. No. 84-044-7125
SUBJECT:
NEW TRANSAXLE CASE
MODELS AFFECTED: ALL 1984 THM 125/125C TRANSAXLES
Beginning with 1984 production of the THM 125/125C transaxles, a new transaxle case went into production. The changes in the 1984 THM 125/125C
transaxle case are as follows:
1.
The manual shaft hole was made larger in diameter to accommodate a larger manual shaft.
2.
The manual shaft seal bore was made deeper to accommodate a double lip seal.
3.
The transmission case casting was changed to accommodate a neutral start switch.
4.
The Low and Reverse snap ring groove was moved toward the case sprocket face to accommodate thicker low and reverse clutch plates.
Notice:
The new 1984 THM 125/125C transaxle case cannot be used to service any prior model years. The past model transaxle case (1983 model or
earlier) cannot be used to service 1984 THM 125/125C transaxles.
