Allante V8-273 4.5L (1991)
Idle Speed Control Motor: Service and Repair
Idle Speed Control (ISC) Assembly
Throttle Body Assembly - Exploded View
REMOVAL:
1.
Disconnect the electrical connector.
2.
Remove the ISC attaching nuts and lock washers.
3.
Remove the ISC assembly from the mounting bracket.
CAUTION: The ISC motor is calibrated at the factory and NO ATTEMPT should be made to disassemble the unit. DO NOT immerse the ISC
in any type of cleaner and always remove before throttle body cleaning and servicing of components. Immersion in cleaner will damage the ISC
unit.
INSTALLATION:
1.
Position the ISC to the mounting bracket.
