Catera V6-3.0L VIN R (1997)
Center Support: Service and Repair
Center Bearing Overhaul
DISASSEMBLY PROCEDURE
1. Remove the propeller shaft.
2. Support the insulator (2) on a vice.
3. Using a suitable tool, press the bearing (3) out of the insulator (2).
4. Discard the bearing, it is not reusable and must be replaced.
ASSEMBLY PROCEDURE
^
Tool Required:
-
J 21474-20 Control Arm Bushing Driver
1. Using the J 21474-20, press the bearing (1) into the insulator (2).
2. Install the propeller shaft.