CTS V6-2.8L (2006)
Power Steering Pump: Service and Repair
Power Steering Pump Pulley Replacement
Power Steering Pulley Replacement
^
Tools Required
-
J 25033-C Pulley Installer
-
J 25034-C Pulley Remover
Removal Procedure
1. Remove the air cleaner assembly.
2. Remove the drive belt. Refer to the following procedure:
^
Drive Belt Replacement - Power Steering and Air Conditioning
3. Using the J 25034-C remove the power steering pump pulley.
Installation Procedure
1. Using the J 25033-C install the power steering pump pulley.
2. Ensure that the axial tolerance of the power steering pulley on the power steering pump is within 0.25 mm (0.010 inch).
3. Install the drive belt. Refer to the following procedure:
^
Drive Belt Replacement - Power Steering and Air Conditioning
4. Install the air cleaner assembly.