CTS V6-2.8L (2006)
Front Steering Knuckle: Service and Repair
Rear Suspension
Knuckle Replacement
Tools Required
^
J 42129 Wheel Hub Remover
^
J 43631 Ball Joint Remover
Removal Procedure
1. Raise and support the vehicle.
2. Remove the tire and wheel.
3. Remove the rear brake rotor.
4. Remove the wheel driveshaft nut and discard.
5. Disconnect the ABS sensor electrical connector.
6. Disconnect the ABS sensor electrical connector from the backing plate.
7. Remove the parking brake cable bracket mounting bolts from the knuckle.
8. Remove the parking brake cable bracket from the knuckle.
