CTS V6-2.8L (2006)
10. Using two equally sized suitable blocks of wood and a suitable transmission jack positioned under the transmission pan area. Support the
transmission case on both sides with the wood blocks to prevent the transmission internal components from contacting the transmission jack.
11. Remove the transmission support.
12. Remove the extension housing.
13. Remove the parking pawl spring.
14. Remove the parking pawl pivot pin.
15. Remove the parking pawl.
16. Inspect the following:
^
Parking pawl tooth for chipping or wear
^
Parking pawl spring for over expansion
^
Pivot pin for scoring, excessive wear
Installation Procedure
1. Install the parking pawl (3).
2. Install the pivot pin (1).
3. Install the parking pawl spring (2). The straight end of the spring locates against the case and the hooked end locates over the parking pawl.
4. Install the extension housing.
5. Install the transmission support.
6. Remove the transmission jack.
7. Install the transmission fluid pan.
