CTS V6-2.8L (2006)
Parking Pawl: Service and Repair
Parking Pawl Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the transmission manual shift shaft nut.
3. Disconnect the shift linkage from the transmission.
4. Place the transmission in neutral by rotating the transmission shift shaft clockwise 2 clicks.
5. Remove the exhaust system.
6. Disconnect the propeller shaft coupler (1) from the transmission flange.
7. Push the front propeller shaft toward the rear of the vehicle in order to release the propeller shaft coupler (1) from the transmission flange.
8. Secure the front propeller shaft (1) to the shift control lever (3) with a piece of mechanics wire (2).
9. Remove the transmission fluid pan.