CTS V6-3.2L VIN N (2003)
Rear Bumper Cover / Fascia: Service and Repair
Fascia Extension Replacement - Rear
Fascia Extension Replacement - Rear
Removal Procedure
1. Remove the push-in retainers (1) securing the rear fascia extension to the vehicle.
2. Remove the screws (2) securing the rear fascia extension to the vehicle.
3. Remove the rear fascia extension from the vehicle.
Installation Procedure
1. Position the rear fascia extension to the vehicle.
2. Install the push-in retainers (1) that secure the rear fascia extension to the vehicle.
Notice: Refer toFastener Notice in Cautions and Notices.
3. Install the screws (2) that secure the rear fascia extension to the vehicle.
Tighten the screws to 6 Nm (53 lb in).