CTS V6-3.2L VIN N (2003)
Rear Door Weatherstrip: Service and Repair
Weatherstrip Replacement - Rear Door Upper Auxiliary
Weatherstrip Replacement - Rear Door Upper Auxiliary
Removal Procedure
1. Lower the window to the full down position.
2. Remove the rear door stationary window/division channel. Refer toWindow/Division Channel - Rear Door Stationary (See: Rear Door Window
Glass/Rear Door Window Glass Weatherstrip/Service and Repair/Door Window Channel/Window/Division Channel - Rear Door Stationary) .
3. Remove the screws from the rear door upper auxiliary weatherstrip.
4. Remove the upper auxiliary weatherstrip.
Installation Procedure
1. Install the rear door upper auxiliary weatherstrip onto the door frame.
Notice: Refer toFastener Notice in Cautions and Notices.
2. Install the screws working from the front to the rear.
Tighten the screws working from the front to the rear to 2 Nm (18 lb in).
3. Install the rear door stationary window/division channel. Refer toWindow/Division Channel - Rear Door Stationary (See: Rear Door Window
Glass/Rear Door Window Glass Weatherstrip/Service and Repair/Door Window Channel/Window/Division Channel - Rear Door Stationary) .