CTS V6-3.2L VIN N (2003)
Front Door Exterior Handle: Service and Repair
Door Handle Replacement - Front Outside
Removal Procedure
1. Place window in the full up position.
2. Remove the door trim panel. Refer to Trim Panel Replacement - Side Front Door (See: Front Door Panel/Service and Repair) .
3. Pull the rear of the water deflector away from the door panel to access the outside door handle. Refer to Water Deflector Replacement - Front
Door. See: Front Door Panel/Service and Repair/Water Deflector Replacement - Front Door
4. Remove the theft shield screws (2), if equipped with theft shield.
5. Remove the theft shield push-in retainer (1) from the door handle, if equipped.
6. Disconnect the lock cylinder rod from the door latch.
7. Disconnect the outside door handle rod (1) by opening the retainer (2) at the door latch.