CTS V6-3.2L VIN N (2003)
Hood Insulator / Pad: Service and Repair
Hood Insulator Replacement
Removal Procedure
1. Open the hood.
2. Remove the Front Hood Seal. Refer toSeal Replacement - Hood Front (See: Hood Weatherstrip/Service and Repair) .
3. Remove the push-in retainers retaining the hood insulator to the hood.
4. Remove the hood insulator from the hood.
Installation Procedure
1. Position the hood insulator to the hood.
2. Install the push-in retainers in order to secure the hood insulator to the hood.
3. Install the Front Hood Seal. Refer toSeal Replacement - Hood Front (See: Hood Weatherstrip/Service and Repair) .
4. Close the hood.