CTS V6-3.2L VIN N (2003)
1. Ensure the area where the emblem/nameplate (2) will be installed is clean and dry.
2. If the location of the emblem/nameplate has not been marked, apply tape and use the following dimensions:
*
32 mm (1.25 in) (a) from the horizontal edge of the rear compartment lid
*
41 mm (1.61 in) (b) from the vertical edge of the rear compartment lid
*
162 mm (6.38 in) (c) from the vertical edge of the rear compartment lid
*
10 mm (0.39 in) (d) from the vertical edges of the Cadillac and CTS emblem
*
33 mm (1.30 in) (e) from the horizontal edge of the rear compartment lid
3. Heat the mounting surface to approximately 27-41°C (80-105°F) using theJ 25070 , if necessary.
4. Ensure that the temperature of the emblem/nameplate is approximately 29-32°C (85-90°F).
Important: Do not touch the adhesive backing of the emblem/nameplate.
