CTS V6-3.2L VIN N (2003)
4. Carefully pull outward at the bottom of the pillar trim in order to use the J 38778 in order to release the three lower retainer clips.
5. Pull outward on the upper portion of the pillar trim in order to release the sheet metal retainer clips from the lock pillar (1).
6. Slide the pillar trim inward and downward in order to release the top locking tab (2) from between the sheet metal and the headliner.
7. Remove the center pillar trim (3).
8. Replace the retainer clips if broken or damaged.
INSTALLATION PROCEDURE
1. Place the metal retention clips to the lock pillar.
2. Secure the new plastic retainer clips (3) to the center pillar (2).