CTS V6-3.2L VIN N (2003)
1. Align the plastic retainers on the body pillar upper garnish molding with the holes in the body pillar.
2. Push the panel inward in order to secure the push-in retainers.
3. Install the rear carpet retainers (1).
4. Install the rear sail panels.
5. Install the rear seat back.
Garnish Molding Replacement - Center Pillar
GARNISH MOLDING REPLACEMENT - CENTER PILLAR
REMOVAL PROCEDURE
1. Disable the SIR system.
CAUTION:
-
Refer to SIR Caution in Service Precautions.
-
In order to prevent SIR deployment, personal injury, or unnecessary SIR system repairs, do not strike the door or the door pillar in the
area of the side impact sensor (SIS). Turn OFF the ignition and remove the key when performing service in the area of the SIS.
2. Remove the front carpet retainers.
3. Remove the rear carpet retainers.