CTS V6-3.2L VIN N (2003)
4. Connect the coolant heater cord to the coolant heater (1).
5. Secure the coolant heater cord clip (2) to the coolant heater cord.
6. Lower the vehicle.
7. Secure the coolant heater cord clips (3, 4) to the following:
-
The engine wiring harness conduit
-
The engine oil level indicator tube
Notice:
Refer to Fastener Notice in Service Precautions.
See: Service Precautions/Vehicle Damage Warnings/Fastener Notice
8. Install the bolt (1) securing the coolant heater ground lead (2) to the camshaft bearing cap (3).
Tighten the coolant heater ground lead bolt to 9 Nm (80 inch lbs.).
