CTS V6-3.2L VIN N (2003)
5. Using the J 45689 disconnect the quick joint (2) by pressing the probe end into the two small openings on the quick joint.
IMPORTANT: The body of the tool (1) should be parallel to the A/C line.
6. Remove the evaporator tube from the strut tower retaining clip (1).
7. Using the J 45689 disconnect the evaporator tube at the evaporator fitting.
8. Remove the evaporator inlet pipe from the vehicle.
INSTALLATION PROCEDURE
1. Coat new O-rings with refrigerant oil.
2. Install the liquid line in to the vehicle.
3. Secure the liquid line into the bracket (1) on the strut tower.
