CTS V6-3.2L VIN N (2003)
1. Install the wheel bearing/hub and backing plate to the knuckle.
Notice: Refer to Fastener Notice in Service Precaution.
2. Install the wheel bearing/hub mounting bolts.
^
Tighten the bolts to 125 Nm (92 ft. lbs.).
3. Install the parking brake cable bracket to the knuckle.
4. Install the parking brake cable bracket mounting bolts to the knuckle.
^
Tighten the bolts to 60 Nm (44 ft. lbs.).
5. Connect the ABS sensor electrical connector to the backing plate.
6. Connect the ABS sensor electrical connector.