CTS V6-3.2L VIN N (2003)
2. Lubricate the washer pump intake nozzle with clean water to aid in the installation of the pump into the washer container.
3. Install the washer pump nozzle (4) in the washer solvent container by snapping into place.
4. Ensure the washer pump is secure to the washer solvent container.
5. Connect the electrical connector (2) to the washer pump.
6. Connect the washer hose (1) to the washer pump.
7. Install the lower air deflector.
8. Open the hood.
9. Fill the washer solvent container.
10. Close the hood.