CTS V6-3.2L VIN N (2003)
Windshield Washer Pump: Service and Repair
Washer Pump Replacement - Headlamp
WASHER PUMP REPLACEMENT - HEADLAMP
REMOVAL PROCEDURE
1. Remove the lower air deflector.
2. Drain the washer solvent container.
3. Disconnect the washer hose (3) from the washer pump.
4. Disconnect the electrical connector (2) from the washer pump.
5. Hold the top of the washer pump with one hand and use a flat-bladed tool in order to pry the pump from the washer solvent container.
6. Remove the washer pump from the washer solvent container.
7. Remove and discard the washer pump grommet (2).
INSTALLATION PROCEDURE
1. Install the washer pump grommet (2) into the washer solvent container (1).