CTS V6-3.2L VIN N (2003)
1. Lubricate the washer pump filter grommet (3) with clean water to aid in the installation of the washer pump grommet (3) into the washer container.
2. Install the washer pump (5) in the washer solvent container (4).
3. Apply inward pressure to seat the pump.
4. Ensure the washer pump is secure to the washer solvent container.
5. Connect the electrical connector (1) to the washer pump.
6. Connect the washer hose (2) to the washer pump.
7. Install the lower air deflector.
8. Open the hood.
9. Fill the washer solvent container.
10. Close the hood.
11. Verify the operation of the pump wash system.
