CTS V6-3.2L VIN N (2003)
Windshield Washer Reservoir: Service and Repair
WASHER SOLVENT CONTAINER REPLACEMENT (Without RPO Code CE4)
REMOVAL PROCEDURE
1. Open the hood.
2. Lift the corner of the condenser seal in order to access the bolt securing the washer solvent container neck to the upper tie bar.
3. Remove the washer solvent container cap from the container.
4. Remove the bolt (3) securing the washer solvent container fill neck (2) to the upper tie bar (1).
5. Remove the lower air deflector.
7. Remove the passenger side headlamp for LHD or the driver side headlamp for RHD.
