CTS V6-3.2L VIN N (2003)
8. Drain the solvent from the washer solvent container.
9. Disconnect the washer hose (8) from the washer pump (7).
10. Disengage the electrical harness retainer clip from the washer solvent container (6).
11. Disconnect the electrical connectors (4) from the washer pump and washer solvent level sensor.
12. Remove the fasteners from the washer solvent container.
13. Loosen the clinch nut (3) from the horizontal bracket to the body rail.
14. Carefully lift the washer solvent container from the key hole slot (1) in the body rail.
15. Guide the fill neck down through the radiator support.
16. Remove the washer solvent container from the vehicle.
17. Remove and transfer the following components from the washer solvent container:
-
the washer pump
-
the washer level sensor
-
the horizontal bracket
-
the washer container cap
INSTALLATION PROCEDURE
