CTS V8-5.7L VIN S (2005)
Tighten the nut to 13 N.m (115 lb in).
6. Press the protective boot on to the generator output BAT terminal.
7. Install the starter heat shield.
8. Lower the vehicle.
9. Install the nut (1) securing the battery positive cable (2) to the underhood fuse block.
Tighten the nut to 15 N.m (11 lb ft).
10. Install the underhood fuse block cover to the underhood fuse block.
11. Position the surge tank inlet hose to the retaining feature of the underhood fuse block cover.
