CTS RWD V6-3.6L (2008)
Parking Brake Cable: Service and Repair
Parking Brake Rear Cable Replacement - Right Side
Parking Brake Rear Cable Replacement - Right Side
Tools Required
J 37043 Park Brake Cable Release Tool
Caution: Refer to Brake Dust Caution (See: Service Precautions/Technician Safety Information/Brake Dust Caution) .
Removal Procedure
1. Raise the vehicle and suitably support. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair) .
2. Remove the right rear tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service
and Repair) .
3. Pull down on the intermediate park brake cable (2) near the park brake cable connector (1).
4. Disconnect the intermediate park brake cable (2) from the park brake connector (1).
5. Disconnect the right rear park brake cable (2) from the intermediate park brake cable connector (3).
6. Use the J 37043 in order to depress the right rear brake cable retainer.
7. Remove the right rear park brake cable (2) from the right rear park brake cable bracket (1).
8. Use the J 37043 in order to depress the right rear brake cable retainer.
9. Remove the right rear park brake cable from the right rear cable bracket (1).
10. Disconnect the right rear park brake cable (2) from the right rear park brake actuator lever (3).
