CTS RWD V6-3.6L (2008)
Parking Brake Cable: Service and Repair
Park Brake Cable Mounting Bracket Replacement
Park Brake Cable Mounting Bracket Replacement
Tools Required
J 37043 Parking Brake Cable Release Tool
Caution: Refer to Brake Dust Caution (See: Service Precautions/Technician Safety Information/Brake Dust Caution) .
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair) .
2. Remove the rear tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and
Repair) .
3. Pull down on the intermediate park brake cable and disconnect the intermediate park brake cable connector (1) from the front park brake cable (2).
4. Using the J 37043 , compress the rear brake cable retainer.
5. Remove the rear park brake cable from the cable bracket (1).
6. Disconnect the park brake cable (2) from the park brake actuator lever (3).