CTS RWD V6-3.6L (2008)
Important: To prevent the ball stud from slipping, insert a hex-head tool while removing the upper control arm-to-steering knuckle nut.
5. Remove the upper control arm to steering knuckle nut.
6. Using the J 24319-B , remove the upper control arm from the steering knuckle.
7. Lower the vehicle.
8. Remove the front shock absorber assembly upper mounting bolts.
9. Remove the front shock absorber assembly from the vehicle.
10. If servicing the front spring, or related parts, refer to Shock, Shock Component, and/or Spring Replacement (See: Suspension Strut / Shock
Absorber/Service and Repair/Front Suspension Shock Absorber/Shock, Shock Component, and/or Spring Replacement) .
Installation Procedure
1. Install the front shock absorber assembly in the vehicle.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
