CTS RWD V8-6.2L SC (2009)
7. Press the secondary fuel tank module downward, aligning the module to the encapsulated ring.
Note: Ensure the lock ring is installed with the correct side facing upward. A correctly installed lock ring will only turn in a clockwise direction.
8. Position the cam lock ring (3) to the fuel tank.
Note: DO NOT use impact tools. Significant force will be required to install the lock ring. The use of a hammer and screwdriver is not
recommended. Secure the fuel tank in order to prevent fuel tank rotation.
9. Use the J 45722 - wrench (1) and a long breaker-bar (2) to install the fuel tank module lock ring (3), by turning clockwise, until fully seated.
10. Connect the electrical connector (1) to the secondary fuel tank module and engage the connector interlock.
11. Install the fuel tank. Refer to Fuel Tank Replacement (See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Tank/Service and
Repair).
