CTS RWD V8-6.2L SC (2009)
2. If replacing the remote pickup line assembly, Connect the transfer hose quick connect fitting (1). Refer to Plastic Collar Quick Connect Fitting
Service (See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Line Coupler/Service and Repair/Plastic Collar Quick Connect
Fitting Service).
Note: Always replace the fuel tank module seal when installing the fuel tank module assembly. Replace the lock ring if necessary. DO NOT apply
any type of lubrication in the seal groove.
3. Install a NEW fuel tank module seal (4).
4. Grasp the fuel transfer hose from inside the fuel tank.
5. Partially install the secondary fuel tank module (2) to the fuel tank.
6. Connect the fuel transfer hose quick connect fitting (1) to the port on the fuel tank module.