CTS RWD V8-6.2L SC (2009)
1. Install the generator bracket to the engine.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the generator bracket bolts (1, and 2) and tighten to 50 Nm (37 lb ft).
3. Install the accessory drive belt idler pulley. Refer to Drive Belt Idler Pulley Replacement (See: Engine, Cooling and Exhaust/Engine/Drive Belts,
Mounts, Brackets and Accessories/Idler Pulley/Service and Repair/Drive Belt Idler Pulley Replacement).
4. Install the generator. Refer to Generator Replacement (V6) (See: Generator Replacement)Generator Replacement (V8) (See: Generator
Replacement).
5. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection (See: Battery/Battery Cable/Service and
Repair).
