CTS RWD V8-6.2L SC (2009)
Alternator: Service and Repair
Generator Bracket Replacement
Generator Bracket Replacement (V8)
Removal Procedure
1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection (See: Battery/Battery Cable/Service and
Repair).
2. Remove the generator. Refer to Generator Replacement (V6) (See: Generator Replacement)Generator Replacement (V8) (See: Generator
Replacement).
3. Remove the accessory drive belt idler pulley. Refer to Drive Belt Idler Pulley Replacement (See: Engine, Cooling and Exhaust/Engine/Drive
Belts, Mounts, Brackets and Accessories/Idler Pulley/Service and Repair/Drive Belt Idler Pulley Replacement).
4. Remove the generator bracket bolts (1, and 2).
5. Remove the generator bracket from the engine.
Installation Procedure