CTS Sedan AWD V6-3.0L (2010)
9. Connect the secondary BPMV inlet brake pipe fitting (1) and tighten to 32 Nm (24 lb ft).
10. Install the RH front compartment sight shield. Refer to Front Compartment Sight Shields Replacement (See: Body and Frame/Spoilers, Flaps,
and Air Dams/Air Dam/Service and Repair/Front Compartment Sight Shields Replacement).
11. Bleed the hydraulic brake system. Refer to Hydraulic Brake System Bleeding (Manual) (See: Brake Bleeding/Service and Repair)Hydraulic
Brake System Bleeding (Pressure) (See: Brake Bleeding/Service and Repair).
12. Perform the Antilock Brake System Automated Bleed (See: Brake Bleeding/Service and Repair).
13. Perform the Diagnostic System Check - Vehicle (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic System
Check - Vehicle).
