CTS Sedan AWD V6-3.0L (2010)
Brake Caliper: Removal and Replacement
Front Brake Caliper Hardware Replacement (JE5, J55)
Front Brake Caliper Hardware Replacement (JE5, J55 (AWD))
Removal Procedure
Warning: Refer to Brake Dust Warning (See: Service Precautions/Technician Safety Information/Brake Dust Warning).
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair
).
Caution: Support the brake caliper with heavy mechanic wire, or equivalent, whenever it is separated from its mount and the hydraulic flexible
brake hose is still connected. Failure to support the caliper in this manner will cause the flexible brake hose to bear the weight of the caliper, which
may cause damage to the brake hose and in turn may cause a brake fluid leak.
3. Using a backup wrench on the brake caliper guide pin, remove the brake caliper guide pin bolts (1).
4. Remove the brake caliper and support with heavy mechanics wire or equivalent.
