CTS Sedan AWD V6-3.0L (2010)
5. Apply a thin coat of high temperature silicone brake lubricant to the brake caliper guide pin.
6. Install the upper brake caliper guide pin (1) to the guide pin seal (2).
Ensure the guide pin seal is fully seated in the groove of the brake caliper guide pin.
7. Install the upper guide pin and seal to the brake caliper bracket.
Ensure the guide pin seal is fully seated in the groove of the brake caliper bracket.
8. Install the brake pad springs.
9. Install the inner brake pad (1).
10. Install the outer brake pad (2).
Note: If reusing the brake caliper guide pin bolt, the threads of the brake caliper guide pin bolt and the threads of the guide pin must be free of
residue and debris prior to application of threadlocker in order to ensure proper adhesion and fastener retention.
11. If reusing the caliper pin bolts, prepare the bolts and the guide pins for assembly:
*
Thoroughly clean the residue from the guide pin bolt threads by using denatured alcohol or equivalent and allow to dry.
*
Thoroughly clean the residue from the guide pin threads by using denatured alcohol or equivalent and allow to dry.
