CTS Sedan AWD V6-3.0L (2010)
1. Assemble the parking brake indicator switch bolt (1) to the parking brake indicator switch (2).
2. Install the parking brake indicator switch assembly to the parking brake lever.
Align the pin on the indicator switch to the locator hole on the parking brake lever.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Tighten the parking brake indicator switch bolt to 2 Nm (18 lb in).
4. Connect the parking brake indicator switch electrical connector.
5. Install the left instrument panel insulator panel. Refer to Instrument Panel Insulator Replacement - Left Side (Left Hand Drive) (See: Body and
Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Instrument Panel Insulator Replacement - Left Side)Instrument
Panel Insulator Replacement - Left Side (Right Hand Drive) (See: Application and ID).