DeVille V8-252 4.1L VIN 8 FI (1983)
FIGURE 2 - POSITIONING THE CLIP
To correct the inoperative TCC condition, replace the applicable torque converter clutch solenoid and harness assembly (P/N 8634960 for AA model
transmissions and PIN 8634961 for OM model transmissions), and correctly position the clip by rotating it as far rearward as possible; then, bend it
toward the depression in the control valve body assembly (approximately 60~ clockwise from its original position as shown in Figure 2 on the reverse
side of this bulletin).
For warranty purposes, use labor Operation Number K6520 at .6 hour.
