cadillac Workshop Repair Guides

Cadillac Workshop Service and Repair Manuals

Garage Door Opener - On Vehicle Service|Page 9836 > < Garage Door Opener - On Vehicle Service
Page 2
background image

1.

Using flat bladed tool, pop trim plate from cover, refer to Figure 1, Item 1 (pry from front section of trim panel; rear section has tabs, front has
flexible retainers).

2.

One screw, refer to Figure 1, Item 2.

3.

Slide forward and down from headliner.

4.

Electrical connection.

5.

Depress tab on lower front of garage door opener from inside of housing.

6.

Slide garage door opener out the access door of housing.

Install

1.

Slide garage door opener into access door of console.

Make sure that the tab snaps into place; an audible click will be heard.

2.

Position overhead console, slide rearward and up.

3.

Screw.

4.

Trim plate.

On-vehicle Service: Concours/Deville UGDO with or without sunroof:

Remove

Garage Door Opener - On Vehicle Service|Page 9836 > < Garage Door Opener - On Vehicle Service