DeVille V8-4.6L VIN 9 (1995)
1.
Release the tabs and remove roof console trim plate, refer to Figure 2, Item 2.
2.
Release tabs retaining sunroof switch/roof support.
3.
Map lamp switch connectors from console.
4.
Electrical connector from garage door opener.
5.
Roof console, refer to Figure 2, Item 1.
6.
Depress tab on lower front of garage door opener from inside of housing.
7.
Slide garage door opener out the access door of housing.
Install
1.
Slide garage door opener into console. Make sure that the tab snaps into place; an audible click will be heard.
2.
Wire leads (with bulb retainer) to map lamps.
3.
Electrical connector to garage door opener.
4.
Sunroof switch/roof support to console and retain with tabs.
5.
Console trim plate.
For UGDO programming, refer to procedure in Section 9P of the 1996 Service Manual.
