DeVille d Elegance V8-4.6L VIN Y (1998)
3. Install the four mounting bolts.
^
Tighten the four mounting bolts to 5 Nm (40 inch lbs.).
4. Install the insulator bolt.
^
Tighten the insulator bolt to 14 Nm (10 ft. lbs.).
5. Install the three EBTCM/BPMV assembly bracket nuts.
^
Tighten the bracket nuts to 10 Nm (89 inch lbs.).
6. Install the EBTCM electrical connector. Make sure the EBTCM connector tab is locked down.
7. Install the Air Cleaner assembly.
8. Install the negative battery cable.
9. Perform the Diagnostic System Check.
