DeVille DHS V8-4.6L VIN Y (2000)
12. Install the rack and pinion heat shield (2) to the vehicle.
13. Install the fasteners (1) in order to retain the rack and pinion heat shield (2) to the rack and pinion.
Tighten the retainers to 9 N.m (80 lb in).
14. Install both A.I.R. Pumps to the vehicle. Refer to Secondary Air Injection Pump Replacement - Bank 1 and Secondary Air Injection Pump
Replacement - Bank 2.
15. Install the brake pressure modulator valve. Refer to Brake Pressure Modulator Valve Replacement.
16. Install the real time dampening sensor links to the lower control arm ball studs.
17. Install the front air deflector. Refer to Front Air Deflector Replacement (See: Spoilers, Flaps, and Air Dams/Air Dam/Service and Repair) in Body
Front End.
18. Install the ball joints to the steering knuckle. Refer to Lower Control Arm Ball Joint Replacement and Lower Control Arm Ball Joint Replacement.
19. Install the front tires and wheels. Refer to Tire and Wheel Removal and Installation.
20. Install the stabilizer shaft. Refer to Stabilizer Shaft Replacement.
21. Lower the vehicle.
22. Remove the J 28467-A, supporting the engine.
