DeVille DHS V8-4.6L VIN Y (2000)
Cross-Member: Service and Repair
Rear Suspension
Support Replacement (FE1, FE3)
Removal Procedure
1. Raise and support vehicle. Refer to Vehicle Lifting.
2. Remove the tires and wheels. Refer to Tire and Wheel Removal and Installation in Wheels, Tires and Alignment.
3. Remove exhaust system. Refer to Exhaust System Replacement in Exhaust.
4. Remove the coil springs. Refer to Coil Spring Replacement (FE1, FE3) or Coil Spring Replacement (FE7).
5. Remove the brake calipers and support. Refer to Brake Caliper Replacement - Rear (Without J55) or Brake Caliper Replacement - Rear (J55) in
Disc Brakes.
6. Disconnect the wheel speed sensor electrical connector from each wheel.
7. Disconnect the ABS electrical connectors from the support assembly.
8. Disconnect the electronic level control link (FE1) or links (FE3).
9. Support the rear suspension support assembly with a transmission jack and securely support.
