DeVille DHS V8-4.6L VIN Y (2000)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
Brake Pressure Modulator Valve (BPMV) Bracket Replacement
Removal Procedure
1. Raise the vehicle. Refer to Vehicle Lifting.
2. Remove the left front wheel. Refer to Tire and Wheel Removal and Installation in Wheels, Tires and Alignment.
3. Remove the left front fascia extension. Refer to Fascia Extension Replacement - Front in Body and Frame.
4. Remove the left AIR pump (if equipped). Refer to Secondary AIR Injection Pump Replacement - Bank 2 in Powertrain Management.
5. Remove the 2 BPMV bracket nuts (2).
6. Remove the 3 BPMV bracket to frame bolts (2).
7. Remove the BPMV bracket (1) from the frame (3).
Installation Procedure