DeVille DHS V8-4.6L VIN Y (2000)
Important: Care should be taken when Installing the condenser not to damage the lower attachment points of both the radiator and condenser.
3. Position the condenser, aligning the lower feet to the lower mounting features located at the front of the radiator.
Notice: Refer to Fastener Notice in Service Precautions.
Important: The bolts retaining the condenser to the radiator end tanks are a special length and should be the ONLY bolts used upon reinstallation.
The use of longer bolts will damage the radiator end tanks.
4. Install the condenser mounting bolts.
Tighten the condenser mounting bolts to 13 Nm (115 inch lbs.).
5. Position the J38185 (3) to the clamp in order to connect the generator cooler inlet hose (2) to the radiator (1).
