DeVille DHS V8-4.6L VIN Y (2000)
5. Position the J38185 (3) to the clamp in order to remove the generator cooler inlet hose (2) from the radiator (1).
6. Remove the two condenser mounting bolts.
Important: Care should be taken when removing the condenser not to damage the lower attachment points of both the radiator and condenser.
7. Lift the condenser upward slightly in order to release the lower feet from the lower mounting features located at the front of the radiator.
8. Lift the radiator up and out the vehicle.
Installation Procedure
1. Install the radiator insulators (1) to the frame.
2. Position the radiator alignment dowels (2) to align with the insulators (1).
