DeVille DHS V8-4.6L VIN Y (2000)
3. Remove the fuel sender assembly.
DISASSEMBLE PROCEDURE
1. Note the position of the fuel sender strainer for installation (4).
2. Support the reservoir with one hand and grasp the fuel sender strainer with the other hand.
3. Pull the fuel sender strainer off of the fuel sender assembly.
4. Inspect the fuel sender strainer. If the fuel sender strainer is contaminated, the fuel tank should be cleaned. Refer to Fuel System Cleaning. See:
Service and Repair
5. Discard the fuel sender strainer after inspection.
