cadillac Workshop Repair Guides

Cadillac Workshop Service and Repair Manuals

Rear Door Limiter > < Rear Door Latch|Service and Repair|Page 10422
Page 3
background image

Important:  Make sure the trim panel harness is located between both the lock and handle rods.

9. Position the rear of the inside handle assembly (1) into the opening of the inner panel.

10. Press the front of the assembly (1) inward until it fully engages the inner panel.
11. Connect the lock and handle rods to the clip guides (2).

12. Position the bell crank into the opening of the inner panel.
13. Press the bell crank inward until it fully engages the inner panel.

Important:  Check for proper operation of the door handles and locking mechanism before installing the water deflector.

14. Install the water deflector. Refer to Water Deflector Replacement - Rear Door  (See: Rear Door Panel/Service and Repair) .
15. Install the door module. Refer to Door Control Module Replacement.
16. Install the door trim panel. Refer to Trim Panel Replacement - Side Rear Door  See: Rear Door Panel/Service and Repair

Rear Door Limiter > < Rear Door Latch|Service and Repair|Page 10422