DeVille DTS V8-4.6L VIN 9 (2002)
Rear Door Weatherstrip: Service and Repair
Sealing Strip Replacement - Rear Door Front Auxiliary
Sealing Strip Replacement - Rear Door Front Auxiliary
Removal Procedure
1. With the door open, remove the front auxiliary sealing strip retainers (1, 2, 3).
2. Remove the sealing strip by pulling it away from the flange.
Installation Procedure
1. Install the front auxiliary sealing strip on to the front door edge.
2. Install the middle retainer (2).
3. Working upward from the center, engage the sealing strip into the flange.
Ensure that the sealing strip is tucked under the reveal molding.
4. Install the upper retainer (1).
5. Working downward from the center, engage the sealing strip into the flange.
6. Install the lower retainer (3), securing both the front and lower sealing strips.