DeVille DTS V8-4.6L VIN 9 (2002)
Vehicle Lifting: Service and Repair
General Information
CAUTION:
^
To help avoid personal injury, always use jack stands when you are working on or under any vehicle that is supported only by a jack.
^
To avoid any vehicle damage, serious personal injury or death when major components are removed from the vehicle and the vehicle is
supported by a hoist, support the vehicle with jack stands at the opposite end from which the components are being removed.
NOTE: When you are jacking or lifting a vehicle at the frame side rails or other prescribed lift points, be certain that the lift pads do not contact the
catalytic converter, the brake pipes or the fuel lines. If such contact occurs, vehicle damage or unsatisfactory vehicle performance may result.
Frame Contact Hoist
FRONT HOIST PADS
IMPORTANT: The front hoist pads must not contact the rocker panels, the front fenders, or the floor pan.
Position the (frame contact) front hoist pads as follows:
^
Under the front frame rail reinforcements.
^
The long sides of the pads parallel to the frame rails.
REAR HOIST PADS
IMPORTANT:
^
The rear hoist pads must not contact the rocker panels to the outside of the frame rail reinforcements.
^
The rear hoist pads must not contact the floor pan.
Position the (frame contact) rear hoist pads as follows:
