DeVille DTS V8-4.6L VIN 9 (2002)
11. Remove the front two and the rear two bolts securing the support assembly to the body.
12. Lower the transmission jack and remove the support assembly.
13. Transfer all necessary parts from the old support to the new.
Installation Procedure
1. Raise the support assembly with the transmission jack in position.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the 2 rear and the 2 front bolts at the mounts.
^
Tighten the front support assembly bolts to 191 Nm (141 ft. lbs.).
^
Tighten the rear support assembly bolts to 191 Nm (141 ft. lbs.).