DeVille DTS V8-4.6L VIN 9 (2002)
Cross-Member: Service and Repair
With RPO FE1 and FE3
Support Replacement (FE1, FE3)
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the tires and the wheels.
3. Remove the exhaust system.
4. Remove the coil springs.
5. Remove the brake calipers and support.
6. Disconnect the wheel speed sensor electrical connector from each wheel.
7. Disconnect the ABS electrical connectors from the support assembly.
8. Disconnect the electronic level control link (FE1) or links (FE3).
9. Support the rear suspension support assembly with a transmission jack and securely support.
10. Remove the 3 bolts per side, securing the support brackets to the body of the vehicle.